Owner manual

5-18
IM 04L42B01-01E
5.9 Partially Expanding the Waveform
Partially expand a waveform (reduce the other sections) on the display.
We recommend that you display the scale when viewing partially expanded channels.
The numbers for the ends of the scale and the boundary position are displayed, and
you can identify the expanded and reduced areas easily. However, numbers are not
displayed for other scale marks.
For a description of the function, see section 1.3.
Setup Screen
• Turning ON/OFF the Partial Expanded Display Function
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Environment tab > View, Message, Input, Tag.
• Partially Expanded Display Method
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Partial.
Setup Items
• View > Partial
If you select On, the Partial setup item appears in the setting mode.
• First-CH/Last-CH
Select the target channels.
• Partial > On/Off
To enable partial expanded display, select On.
• Partial > Expand
Set the position where the value specified by Boundary is to be displayed within the
display span in the range of 1 to 99.