Owner's manual

85
Installation and Wiring
Recommended Replacement
Periods for Worn Parts
Setup Items and
Default Values
IM 04L42B01-02E
Menu tab
*2
Alarm
Setup Item Selectable Range or Selections Default Value Setting
Basic setting
Reflash
Rate of change > Decrease
Rate of change > Increase
Indicator
On/Off/On-1s
*3
/On-2s
*3
1 to 32
1 to 32
Hold/Nonhold
Off
1
1
Nonhold
Switch, Relay
Internal Switch > AND
Relay > AND
Relay > Action
Relay > Hold
Relay > Relay Action on ACK
*1
None/S01/S01-S02/.../S01-S29/S01-S30
None/I01/I01-I02/.../I01-I35/I01-I36
Energize/De_energ
Hold/Nonehold
Normal/Reset
None
None
Energize
Nonhold
Normal
Hysteresis
Meas CH > High/Low
Meas CH > Delta High/Low
Math CH > High/Low
Ext. CH > High/Low
0.0 to 5.0
0.0 to 5.0
0.0 to 5.0
0.0 to 5.0
0.5
0.0
0.0
0.0
A/D, Memory
Setup Item Selectable Range or Selections Default Value Setting
Without /AS1
Scan interval > Scan mode
Normal > Scan interval
Normal > A/D integrate
Fast
†
> Scan interval
Fast
†
> A/D integrate
Normal/Fast
125ms/250ms(DX2004, DX2008)
1s/2s/5s(DX2010, DX2020, DX2030, DX2040,
DX2048)
Auto/50Hz/60Hz/100ms
25ms (DX2004, DX2008)
125ms (DX2010, DX2020, DX2030, DX2040,
DX2048)
600Hz
Normal
125ms
1s
Auto
25ms
125ms
600Hz
Memory > Data kind Display/E+D/Event Display
With /AS1
*3
The Scan interval items are the same as on a DX without the /AS1 option.
Memory > Data kind Display/Event Display
†: You cannot select this option on a DX with external input channels (/MC1) or when the multi batch function (/BT2) is in use.
Signature (/AS1 option)
*3
Setup Item Selectable Range or Selections Default Value Setting
Process type Batch/Continue Batch
Sign from recorder Off/Sign1/Sign1+2/Sign1+2+3 Off
Signature at batch stop On/Off Off
FTP transfer at signing On/Off Off
Burnout, RJC
Setup Item Selectable Range or Selections Default Value Setting
First-CH, Last-CH Channel number 001
Burnout set > Mode Off/Up/Down Off
RJC > Mode
RJC > Volt
Internal/External
–20000 to 20000µV
Internal
0
Setup Items and Default Values