Manual

IM 01E20C01-01E
5-4
5. BASIC OPERATING PROCEDURES
Setting Mode
Yes
Setting Mode
P:Protect
B:Easy Setup
C:Basic Setup
Setting Mode
No
Yes
Setting Mode
No
Yes
F0503-2.EPS
The reversed-character (i.e. the cursor position)
indicates the item that is currently selected.
Setting Mode
To Parameter
Search Mode
A screen is displayed to confirm whether or not the
system is to enter Setting Mode.
Press the
switch and select [Yes].
When [Yes] has been selected, touch the
switch.
NOTE
When the operations except and
switches are carried out, the system will
automatically return to the Display Mode.
When no operations in this display are carried
out for 20 seconds, the system will automati-
cally return to the Display Mode.
In order to request confirmation, the entire display
flashes on and off.
Touch the switch once again at this time to
fix your selection.
NOTE
When no operations in the flashed display are
carried out for 20 seconds, the system will
automatically return to the Display Mode.
When the operations except are carried
out, the system will automatically return to the
Display Mode.
The system enters Setting Mode.
Parameters to be set can be selected.
This completes the procedure for changing from the
Display Mode to the Parameter Search Mode.