Manual

Calibration 33
Step Display Description Text
Ref
7 TOTCON A division factor to convert the totals to
different units from those used for rate
(ie.gallons/min and barrels).
3.4
1 Rate and totals have the same engineering
units.
x.xxxx Other factors can be programmed between 0.01
and 2000.
8 t.dPt Number of decimal points with which the
resettable total is displayed between 0 to 0.000.
9 A.dPt Number of decimal points with which the
Accumulated (non resettable) total is displayed
between 0 to 0.000.
10 ACCESS
Front
No Acc
Enable access to calibration routine via the
front keyboard only.
Enable access via front keyboard.
Disable access via front keyboard.