Manual

Step Display Description Text
Ref
9 CUTOFF
xx.x
The signal Cutoff.
Enter as a % of the Span.
3.3.2
10 F dPt Number of decimal points with which the Rate
is
to be displayed between 0 to 0.00000.
11 t.base The Timebase
with which the Span is entered
must be programmed.
3.2.1
60secs
hours
days
secs
units/min
units/hour
units/day
units/second
12 FILTER The filter constant
for filtering the rate display. 3.2.2
1
to
99
No filtering.
Very heavy filtering
13 TOTCON A division factor
to convert the totals to different
units from those used for rate (ie gallons/min and
barrels).
3.4
1 Rate and totals have the same engineering units.
x.xxxx Other factors can be programmed between 0.01
and 2000.
14 t.dPt Number of decimal points with which the
resettable total is displayed between 0 to 0.000.
15 A.dPt Number of decimal points with which the
Accumulated
(non resettable) total is displayed
between 0 to 0.000.
16 ACCESS
Front
No Acc
Enable access to calibration routine via the front
keyboard only.
Enable access via front keyboard.
Disable access via front keyboard.
Calibration 33