Manual

CONTENTS
1. Introduction 3
1.1 Model Number Designation 4
2. Specification 5
3. Operation 7
3.1 Front Panel Operation 8
3.2 Batch Operations 11
3.2.1 Control Relay Outputs 13
3.2.2 Signal Timeout 14
3.2.3 End of Batch 15
3.2.4 Auto Restart 16
3.2.5 Automatic Overrun Compensation 17
3.3 Calculation of Rate and Total 18
3.3.1 Analog Input 18
3.3.2 The Cutoff Point 19
3.3.3 Filtering 20
3.4 Total Conversion 22
3.5 The Output Pulse and Flow Alarm 23
4. Options 25
4.1 The RS232/422/485 Interface Option 25
4.1.1 Hardware 25
4.1.2 Multipoint Communication 26
4.1.3 Communication Protocol 28
5. Calibration 30
5.1 Programming the Setup Parameters 32
5.2 Entering the Batch Parameters 34
5.3 Programming Options 36
5.4 Checking the Input Signal 38