Owner manual

Parameter Value Description
15. 20mA xxxx.xxx Flowrate or temperature which
corresponds to 20mA.
17. PULSE Ener
Volu
Defines whether the pulse output is for
the energy or volume total.
18. PULSE xxx.x kWh Defines how often a pulse is output
(maximum frequency = 49Hz).
19. CLOCK xx
Hour/Min
Set time in hours and minutes.
Real time clock is able to run without
power for two days typically.
20. DATE xxxx
Year/Month/Day
Set date in year, month and day.
Real time clock is able to run without
power for two days typically.
21. COMMS NONE
M-BUS
RS485
If no communications are to be used,
Set-up Mode continues at step 25.
Meter-bus (see Section 4).
Modbus RTU.
22. BAUD xxxx Communications baud rate between 300
and 9600.
23. PARITY Even/Odd/None Communications parity (with Meter-bus
the parity is not changeable and is set to
even parity).
24. BUS xx ADDR Bus address for the communications
link.
Set-up Mode 47