User Manual

<4. COMMISSIONING OF pH/ORP>
4-2
IM 12A01A02-01E 5th Edition : Oct. 31, 2013-00
Table 4.1 Menu Structure and Default Values in “Commissioning”
Parameter Ref. sect.
Sensor setup Sensor type 4.1
Measurement setup
Measurement 4.2.1
Temperature setting
Temp. element 4.2.2
Temp. compensation Compensation 4.2.3
Reference temp.
Process Temp. Compensation
Calibration settings pH settings Zero and Slope units 4.2.4
Limits and timig
Buffers(selectset)
Zero/Slope/ITP
Auto correct (Zero, Slope)
ORP settings
rH settings
Limit and timing
Zero/Slope
Impedance settings 4.2.5
Concentration Unit 4.2.6
Sensor diag. settings Input 1 imp.: 4.2.7
FINE
Input 2 imp.:
Process time
Heat cycle:
Deneheatcycle
Output setup mA 4.3
Output
Process parameter
Setup
Linear
0 % value
100% value
Table
Burn
Dampingtime
Simulate Simulation perc.
CongureHold
Errorconguration 4.4
Logbookconguration 4.5
Advanced setup Settings 4.6.1
Tag 4.6.2
Passwords 4.6.3
Date/Time 4.6.4
Communication 4.6.5
HART
PH201G
Factory setup 4.6.6
Displaysetup Maindisplay(Dualdisplay,Individualdisplay) 4.7.1
Trend 4.7.2
Auto Return 4.7.3
Adjust contrast 4.7.4
MONITORdisplay 4.7.5
Calculated data setup Function 4.8
NOTE
Alltheparametersforthequicksetup(underlinedonesinTable4.1)arecrucialformeasurement.
If you change any of them, other parameters may be initialized. For the parameters that may
initializeothervalues,seeAppendix1.