User Manual

<2. WIRING AND INSTALLATION>
2-15
IM 12A01A02-01E 5th Edition : Oct. 31, 2013-00
2.7 Operation
Whenallwiringiscompleted,turnonthepoweroftheinstrument.MakesurethattheLCD
screenturnson.Then,thescreenchangestotheQuickSetupdisplay.Iftheinstrumentisnot
congured,anerrorindicatormaybedisplayed,orthemeasurementvaluesdisplayedmaybe
incorrect. Check the initial settings and change them to suit your purpose.
If you are using the without display unit, refer to “HART communication (TI 12A01A02-60E).”
NOTE
Afterturningonthepower,ittakesoccasionallymorethan1minutetochangetotheQuickSetup
display.
NOTE
Acurrentof12mAisoutputforseveralsecondsafterpower-on.Thisisthespecication.
l Change language
Whenthepoweristurnedon,theQuicksetupdisplayappears.
Upondelivery,thedisplaylanguageissettoEnglish.Ifyouwanttousealanguageotherthan
English, select your desired language.
Chinese
Czech
English
French
German
Italian
Japanese
Korean
Portuguese
Russian
Spanish
Change language
The instrument will restart
Are you sure? Yes
Warning
Start quick setup?
Yes
No
Change language
Quick setup
Chinese
Czech
English
French
German
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish
(2)
(3)
(1)
Figure 2.10 Changing the language
(1) Select♦Changelanguage.
(2) Select a desired language (click the
to scroll the language options.)
(3) Click YES.
Changing languages automatically reboots the FLXA21.
Checkthattheparametersmatchyourspecicationsandmodifythemifnecessarybeforeusing
the instrument.
AsheetforusersettingsiscontainedintheCD-ROM.Pleasetakeamemoofyoursettingsonit
whenyouconguretheFLXA21andkeepthesheetjustincase.
PH
SC
ISC
DO
SENCOM
2