User Manual

<Appendix 3 For ISC (Inductive Conductivity)>
App.3-8
IM 12A01A02-01E 5th Edition : Oct. 31, 2013-00
Table M NaOH 25..50% (Conductivity unit: S/cm)
Solutions
(Conc.)
Temp.ranges
Solut.
Min.
Solu-
tion 2
Solu-
tion 3
Solu-
tion 4
Solu-
tion 5
Solu-
tion 6
Solu-
tion 7
Solu-
tion 8
Solu-
tion 9
Solut.
Max.
25 % 28 % 30 % 32 % 35 % 38 % 40 % 42 % 45 % 50 %
Tmin. 0˚C 0.140 0.100 0.075 0.060 0.040 0.024 0.017 0.012 0.010 0.007
2. 10˚C 0.212 0.174 0.148 0.124 0.094 0.074 0.063 0.053 0.038 0.025
3. 18˚C 0.270 0.232 0.207 0.184 0.153 0.131 0.120 0.105 0.090 0.078
4. 25˚C 0.352 0.313 0.289 0.266 0.233 0.207 0.194 0.180 0.162 0.146
5. 30˚C 0.411 0.372 0.347 0.323 0.291 0.264 0.248 0.233 0.214 0.195
6. 40˚C 0.528 0.489 0.463 0.440 0.405 0.373 0.354 0.337 0.317 0.293
7. 50˚C 0.645 0.605 0.580 0.556 0.520 0.482 0.460 0.441 0.420 0.390
8. 60˚C 0.796 0.766 0.746 0.724 0.694 0.660 0.639 0.623 0.604 0.570
9. 75˚C 1.023 1.007 0.995 0.980 0.955 0.925 0.908 0.893 0.873 0.839
Tmax. 80˚C 1.098 1.086 1.078 1.066 1.042 1.015 0.997 0.982 0.963 0.929
Tref. 25.0˚C 0.352 0.313 0.289 0.266 0.233 0.207 0.194 0.180 0.162 0.146
<User-denedmatrixes>
Theuser-denedtemperaturecompensationmatrixisamatrixdenedbyusers.Entervaluesas
shown in Table 3. The gray areas must be entered.
Table3 Exampleofuser-denedmatrix(Referencetemperature(Tref.):25.0˚C,Conductivityunit:S/cm)
Solutions
(Conc.)
Temp.ranges
Solut.
Min.
Solut.
Max.
Solu-
tion 2
Solu-
tion 3
Solu-
tion 4
Solu-
tion 5
Solu-
tion 6
Solu-
tion 7
Solu-
tion 8
Solu-
tion 9
0 % 15 % 1 % 3 % 4 % 5 % 6 % 8 % 10 % 12 %
Tref. (25.0˚C) 0 0.410 0.052 0.142 0.183 0.222 0.256 0.313 0.355 0.381
Tmin. 0˚C 0 0.215 0.035 0.087 0.113 0.133 0.150 0.176 0.195 0.206
Tmax. 100˚C 0 1.13 0.119 0.315 0.407 0.495 0.574 0.717 0.850 0.967
2. 10˚C 0 0.293 0.042 0.109 0.140 0.167 0.190 0.226 0.255 0.274
3. 18˚C 0 0.455 0.047 0.125 0.163 0.195 0.221 0.267 0.303 0.327
4. 25˚C 0 0.410 0.052 0.142 0.183 0.222 0.256 0.313 0.355 0.381
5. 30˚C 0 0.557 0.056 0.153 0.200 0.242 0.278 0.338 0.389 0.424
6. 40˚C 0 0.551 0.067 0.179 0.233 0.281 0.323 0.396 0.458 0.502
7. 50˚C 0 0.645 0.070 0.201 0.265 0.320 0.368 0.454 0.527 0.580
8. 60˚C 0 0.742 0.080 0.223 0.293 0.355 0.410 0.507 0.592 0.658
9. 80˚C 0 0.936 0.100 0.270 0.350 0.425 0.493 0.612 0.721 0.814
Note: Thistableisasshownonthescreen.Thegrayareasmustbeentered.
Set the reference temperature in the Temp. comp. screen (default: 25.0°C).
Input concentration values in the Solution screen.
ThevaluesmustbeenteredinascendingorderfromSolution(Min.)toSolution(Max.).Solution
(Min.)andSolution(Max.)mustbeentered.
Input temperatures for compensation in the Temp. ranges screen.
Inputtheconductivityvalues*atrespectivetemperaturesintheSolution(Min.)screenandthose
intheSolution(Max.)screen.Inputothervalues,ifany,intheSolutionnscreen.
*: Entertheprecompensatedconductivity.
Allcellsoftwouser-denedmatrixesareblankasadefault.Ifanycellsarenotblank,clearthem.
After entering all values, select “Check values?” to verify that there is no error.
Thisfunctionchecksifthematrixisconsistentlyincrementalordecremental.Ifanyerrorisfound,
itslocationisspecied.
Ifthereisnoerror,thematrixiscompensatedlinearlyandtheblanksofthetable(ifany)arelled.
Ifsomeareasareleftemptywithoutrunning“Checkvalues?”,a1st/2ndcomp.matrixerrorwillbe
issued.