User Manual

<1. INTRODUCTION AND GENERAL DESCRIPTION>
1-4
IM 12A01A02-01E 5th Edition : Oct. 31, 2013-00
1.2 Screen operation
CAUTION
Pressthetouchscreenonlywithyourfinger.Donotuseatoolwithasharptip(ex.pencil,
ballpoint pen), a thin stick, a tool with a hard tip etc. to avoid scratches on the touch screen.
Press the center of the icon or character to avoid wrong operation.
The main screen operations are as follows.
When you press any of the following icons on the screen, the screen changes to the respective
displayorexecutestherespectivefunction.
→ →
Returns to the main display (or home display).
Returns to the previous display.
Moves the cursor for selecting the menu item. Pressing the icon moves the cursor
downtothenextitem.Whenthecursorisontheitemattheverybottom,thecursor
jumps back to the item at the top.
 Conrmstheinput;forexample,theselectedmenuitemorsettingvalue.
NOTE
When no operation is performed for 10 minutes or 60 minutes (depending on the setting of “Auto
Return”),thedisplayexceptTrenddisplayautomaticallychangestotheMonitordisplay(ortothe
MaindisplayortheHomedisplaywhentheMONITORdisplayisdisabled).
TheguresinthissectionshowthepHmeasurementforexample.
Eachdisplayisdifferentindetailsduetosettings.Eachdisplayisonlyanexampleforsome
settings.
n Monitor display
10.38
pH
C
A
B
Figure 1.3 Example of monitor display
Monitor display
TheMonitordisplayappearsuponstartupwhentheMONITORdisplayisenabled.
When the measurement value (primary value) on the main or home display is pressed, the
monitor display appears.
A: Measurement value
B: Unit
C:SensorNo.