User Manual

<9. OPERATION OF ISC (Induvtive Conductivity)>
9-2
IM 12A01A02-01E 5th Edition : Oct. 31, 2013-00
9.1 Change language
ThescreenissettodisplayEnglishatfactoryshipment;ifyouwishtousetheFLXA21inanother
language,rstselectalanguageasdescribedinsection2.7.
9.2 Quick setup
TheQuicksetupscreenisusedtosetupthebasicitemsyouwanttosetupfirst,suchasthe
date/time and sensor settings. The detailed settings are described in chapter 11, Commissioning.
YoumayleavetheQuicksetupnowandreturntoitlater;however,itisrecommendedtoperform
thequicksetuprst.
Each time the FLXA21 is started up, this screen is displayed. If it is not necessary to change the
setup,pressNoor
.
NOTE
When no operation is performed for 10 minutes or 60 minutes (depending on the setting of “Auto
Return”),thedisplayexceptTrenddisplayautomaticallychangestotheMonitordisplay(ortothe
MaindisplaywhentheMONITORdisplayisdisabled).