Manual

<3. Commissioning>

IM 12A01A02-12E 4th Edition : Sep. 3, 2013-00

3. Commissioning

QUICK SET-UP NOTES:

a. pH measurement module

 Under“measurement“aselectionismadeforpH,ORPorpH&ORP.Theselected

measurement must be in accordance with the sensor wiring. When rH measurement is

requestedpH&ORPmustbechosenonthislevel.TherHmustthenbeselectedinthe

commissioning menu.

b. SC measurement module

 Under“measurement”aselectionismadebetweenConductivity,Resistivity,Concentration

or Concentration plus Conductivity. On this level only Conductivity or Resistivity can be

selected. Settings for Concentration measurement must be done in the commissioning

menu.

c. DO measurement module

 Under“sensortype”aselectionismadeforGalvanicorPolarographic.Theselectedsensor

type must be in accordance with the sensor wiring. Otherwise the analyzer or sensor can be

damaged.