User's Manual
P.3/4IM 01W06E01-01EN
F04.ai
Velocity measurement range
Velocity [mm/s]
Frequency (Hz)
Acceleration measurement range
Acceleration [m/s
2
]
Frequency (Hz)
Figure: Measurable Range
Battery Characteristics:
The typical battery life is 4 years in the following conditions*.
• Update period: 1 hour
• Ambient temperature: 23±2°C
*: Environmental condition such as vibration and the type of connected device may affect the battery life.
Update Time:
1 minute to 3 days
Functional Specications
Output:
LoRaWAN (EU868: EU, AS923: Southeast Asia, US915: North America)
NFC Interface:
NFC Forum Type 2 Tag
Diagnostic Function:
Battery alarm, internal temperature, wireless communication failures, sensor over-range,
sensor failures, memory failures
Software Download Function:
Allows the user to update software of the sensor via the NFC interface
Installation Environment
Ambient Temperature Limits:
Operating: -20 to 85°C (altitude up to 3000 m)
Ambient Humidity Limits:
Operating: 0 to 100% RH (non-condensation)
Shock Resistance:
100 G
Physical Specications
Housing Material:
For detail, refer to “MODEL AND SUFFIX CODES.”
Weight:
260 g
Mounting:
Mounting on the measurement target using the screw*
(a hexagon socket head screw is included)
*: Can also mount using the magnetic holder supplied as an accessory. Note that, when using the
magnetic holder, the vibration measurement frequency band
Software Specications
This software is used to perform the setting and status check of this product via the NFC
interface.
Operating Environment:
Item Recommended System Requirements
OS Android 5.1.1 or higher
CPU Snapdragon 800 or equivalent or higher
Resolution 1280x720 dots or more
NFC Reader, writer
GPS Optional
Note of Available Android Device:
When using Sushi Sensor APP for ATEX intrinsically safe explosion devices, the Android
device must comply with the following.
• When using an NFC link in a non-hazardous area, the maximum magnetic eld
strength generated by the Android device is 18 A/m (r.m.s.) or less (Compliant with
ISO / IEC 14443).
• When using an NFC link in a hazardous area, only the Android device conrmed by
Yokogawa Electric Corporation can be used.
• If additional information and approvals for Android devices are required, contact a
Yokogawa representative.
Model and sufx codes
Model Sufx Codes Description
XS770A*
1
................................................... Wireless Vibration Sensor
--- -A .......................................... Always A
Area 2 ..................................... EU
3 ..................................... North America*
2
4 ..................................... Southeast Asia
Type 00 .............................. General Purpose
K2 ..............................
Intrinsically Safe for ATEX, II 3 G Ex ic IIB T4 Gc
--- -A ......................... Always A
Housing material 1 ..................... Plastic (PBT), Stainless steel*
3
2 ..................... Plastic (PC), Stainless steel*
4
Power source C ................ Battery powered including battery
--- A .......... Always A
*1: A hexagon socket set screw is included.
*2: Conversion screw is included when area code is 3.
*3: Applicable when area code is 2 or 4.
*4: Applicable when area code is 3.
Optional Accessories
Item Parts Number Description
Magnetic holder F9096DA Magnet for mounting (M6 female screw)
Hexagon socket set screw B1137BS Screw for mounting (M6)
Conversion screw F9096CM Screw for mounting (M6 - 1/4 28UNF) *
1
*1: Conversion screw is included when area code is 3.
Model Sufx Codes Description
XS70BT*
1
................................................... Lithium battery
Battery type -A .......................................... Dedicated battery for XS770A
--- A ..................................... Always A
Number of Unit -C004 ........................ 4 units
-C012 ........................ 12 units
*1: The XS70BT is a set of a dedicated product (model: LS14500 C5SY) with battery connectors
attached to SAFT battery
Dimensions
Main unit
F05.ai
NFC interface
Mounting female screw (M6)
Base
Case
46 (1.81)
46 (1.81)
97 (3.82)
ø30 (1.18)
Magnetic Holder Parts No.: F9096DA
Mounting female screw (M6)
F06.ai
ø40 (1.57)
15 (0.59)
Hexagon socket set screw (M6) Parts No.: B1137BS
F07.ai
2:1
12 (0.47)
2:1
3 (0.12)
Conversion Screw (M6 - 1/4 28UNF) Parts No.: F9096CM
2:1
UNF1/4-28
M6x1
2:1
(0.472)
12
1.1 (0.043)
F08.ai
7.2 Regulatory Compliance Statements
This product satises the following standards.
* Please conrm that an installation region fullls an applicable standard. If additional regulatory
information and approvals are required, contact a Yokogawa representative.
Telecommunication Compliance:
RE Directive (EU Countries)
Hereby, Yokogawa Electric Corporation declares that the radio equipment type
XS770A complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is attached to the product.
FCC compliance (United States)
FCC ID: SGJ-WFC016
FCC Approval
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1)
This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Co-located:
This transmitter must not be co-located or operated in conjunction with any other antenna
or transmitter.
FCC WARNING
Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
RF Exposure Compliance:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This
equipment should be installed and operated keeping the radiator at least 20 cm or more
away from person’s body.
ISED compliance (Canada)
IC: 8999A-WIC015
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
French:
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme
aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
RF Exposure Compliance:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 20 cm or more
away from person’s body.
French:
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées
pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’ISDE. Cet équipement doit être installé et utilisé en
gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.