User Manual

<D1. Initial Conguration>

D1-1

IM 01W02E01-01EN

PART-D. SETUP

D1. Initial Conguration

Initial conguration is required to connect YFGW510 to YFGW410.

To set the initial conguration, install the eld wireless access point setup tool (setup tool) pro-

vided with YFGW510 on a PC and connect the infrared adapter of the PC to YFGW510.

The table below shows the essential items to set in the initial conguration.

Setting item Description Scope

Device tag The device tag of YFGW510

All models

Password to YFGW410 Password to connect to YFGW410

Password to log in to the eld wireless access point

setup tool

SSID1 Identication code of the wireless LAN

All models with wireless

LAN specication

Encryption 1 Encryption method

Network key 1 Initial encryption key

Band 1 Frequency band of the wireless LAN

Channel 1 Channel of the wireless LAN

Data rate 1 Communications rate of the wireless LAN

SSID2 Identication code of the wireless LAN

All models with redundant

wireless LAN specication

Encryption 2 Encryption method

Network key 2 Initial encryption key

Band 2 Frequency band of the wireless LAN

Channel 2 Channel of the wireless LAN

Data rate 2 Communications rate of the wireless LAN

Note: The default settings are provided in the descriptions below.