User Manual

<C5. Wiring>
C5-14
IM 01W02E01-01EN
• WLAN specication (redundant communications)
FC0512.ai
Mounting YFGW510 to the vertical piping
Mounting YFGW510 to the horizontal piping
Wireless LAN antenna
Wireless LAN antenna
Antenna Extension Cable
Bracket 1
Bracket 2
U Bolt
Nut
Nut
Spring washer
Wireless LAN antenna
Antenna
Extension Cable
Bracket 1
Bracket 2
U Bolt
Nut
Spring washer
Figure C5-12 Connecting brackets to fasten the WLAN redundant specication antenna
l Wireless LAN antenna fastening procedure
1. Fix the antenna extension cable to the bracket 1 with the provided nut as shown in the gure
above.
2. Fix the bracket 1 to the 2-inch (2B) pipe by using the provided a pair of U bolts and bracket
2.
3. Screw the antenna into the antenna connector of the antenna extension cable on the
bracket 1.
Tighten the antenna connector with a torque of 2 to 3 N∙m.
4. Protect the joint of the antenna and the connector with tape to increase environmental re-
sistance. For details on taping, see C5.4.1 Mounting ISA100.11a antenna to YFGW510.