User Manual

<D3. Conguration Method>
D3-9
IM 01W02E01-01EN
l Network key setting
The network key to be set for the Field Wireless Access Point has the following restrictions:
• Up to 31 characters
• Single-byte alphanumeric characters and other marks and signs (e.g., “!”, “$”, “#”)
• Band and channel setting regulation
The following table shows the selectable channels.
2.4 GHz Band 5 GHz Band
Channel
Center Fre-
quency (GHz)
Channel
Center Fre-
quency (GHz)
Channel
Center Fre-
quency (GHz)
Auto ― Auto ― 116 5.580
1 2.412 36 5.180 120 5.600
2 2.417 40 5.200 124 5.620
3 2.422 44 5.220 128 5.640
4 2.427 48 5.240 132 5.660
5 2.432 136 5.680
6 2.437 52 5.260 140 5.700
7 2.442 56 5.280
8 2.447 60 5.300 149 5.745
9 2.452 64 5.320 153 5.765
10 2.457 157 5.785
11 2.462 100 5.500 161 5.805
12 2.467 104 5.520 165 5.825
13 2.472 108 5.540
14 2.484 112 5.560
• Data rate setting regulation
The following table shows the selectable communication data rates.
Data Rate (Mbps)
Band
2.4 GHz 5 GHz
Auto Y Y
1 Y N
2 Y N
5.5 Y N
11 Y N
6 Y Y
9 Y Y
12 Y Y
18 Y Y
24 Y Y
36 Y Y
48 Y Y
54 Y Y
Note: “Y” means selectable, “N” not selectable.
After entering all the required items, click the [Save] button to store settings in YFGW510.
In the 5GHz band, must keep the data rate of less than 12 Mbps.