User Manual

<D3. Conguration Method>
D3-2
IM 01W02E01-01EN
D3.2 Display/Edit Mode Switching
The eld wireless access point setup tool has two operation modes: Display, to view the setting
information, and Edit, to congure YFGW510. The setup tool always starts up in Display mode.
To allow for YFGW510 conguration, the mode needs to be switched to Edit.
To change modes, select the [Maintenance] tab as shown in Figure D3-1.
FD0301.ai
Figure D3-1 Maintenance tab
Click the button in the [Display Mode/Edit Mode] eld to select the target mode.
If the button reads “Edit Mode”, the setup mode is Display. Otherwise, the current mode is Edit.
Clicking the [Edit Mode] button displays a conrmation dialog box as shown in Figure D3-2.