User Manual
<D2. Setup Tool>
D2-7
IM 01W02E01-01EN
FD0206.ai
Figure D2-6 Main window
The Backbone Interface tab of the setup tool’s main window is always shown at startup of the set-
up tool. The window is also shown in Display mode with the parameter elds and buttons grayed
out.
l Problem with infrared communications
If, after login to YFGW510, an infrared communication failure occurs while attempting to access
YFGW510 via the setup tool as described in D3 Conguration Method, the communication error
window shown in Figure D2-4 appears similarly when an error occurs during login to Congura-
tion tool.
After verifying and xing the problem, click the [OK] button to close the window. In this case, retry
to log in again.
l Setup tool operation timeout
If there is no operation for ve minutes during the conguration of the eld wireless access point
setup tool indicate a timeout error shown in Figure D2-7, will appear on top of the main screen. In
this case, retry to log in again.
FD0207.ai
Figure D2-7 Timeout error window