User Manual

<B3. LED Display Function>
B3-1
IM 01W02E01-01EN
B3. LED Display Function
n The functions of the status indicator LED on the front face are as fol-
lows.
LED Function
ACT Display the operating status of YFGW510
LAN Display the operating status of the communication interface (100BASE-TX/100BASE-FX)
ISA100 Display the operating status of ISA100.11a antenna
C1 Display the operating status of wireless LAN antenna 1
C2 Display the operating status of wireless LAN antenna 2
AP Not used for YFGW510
n Displaying the operating status
The relation of the device status and LED status is as follows.
LED Power off Starting up
Connect-
ing
Normal
Mainte-
nance
Abnormal
ACT OFF Orange
Orange
blink
Green Red blink Red
Details of the device status are as follows.
Status Description
Power off Power supply is OFF.
Starting up Power supply is turned on and the device is being initialized.
Connecting Startup has completed and the device is trying to connect to YFGW410.
Normal The results of the self-diagnosis (communication, operation) are all normal.
Maintenance
YFGW510 is being set up (device tags and parameters for wireless LAN, etc. are being set
up through the infrared communication).
Abnormal Any of the results of the self-diagnosis (communication, operation) is abnormal.
n Displaying the communicating status
The relation of the communication status and LED status is as follows.
LED Power off
Starting
up
Signal
search
Link
down
Link up
Commu-
nicating
Mainte-
nance
Abnor-
mal
LAN OFF OFF N/A OFF Green
Green
blink
OFF Red
ISA100 OFF OFF N/A N/A Green
Green
blink
OFF Red
WLAN-C1 OFF OFF
Orange
blink
OFF
Green
blink
Green OFF Red
WLAN-C2 OFF OFF
Orange
blink
OFF
Green
blink
Green OFF Red
WLAN-AP ― ― ― ― ― ― ― ―