User Manual

<A2. System Conguration>
A2-1
IM 01W02E01-01EN
A2. System Conguration
This section describes the conguration for the eld wireless system including YFGW510.
Field Wireless
Management Console
Field Wireless
Access Point
(YFGW510)
Field wireless device
Field wireless
network
(ISA100.11a)
Field Wireless
Management Station
(YFGW410)
Host system
Field network
Field wireless
backbone network
Field wireless
network
FA0201.ai
Subnet A
Field Wireless
Management
Console
Field Wireless
Access Point
(YFGW510)
Field Wireless
Access Point
(YFGW510)
Field wireless device
Field wireless
network
(ISA100.11a)
Field Wireless
Management
Station
(YFGW410)
Subnet A
Host system
Field network
Field wireless
backbone network
Field wireless
network
FA0202.ai
Figure A2-1 Minimum conguration Figure A2-2 YFGW510-redundant conguration
Figure A2-1 shows the minimum conguration with a single YFGW510, and Figure A2-2 shows
the YFGW510-redundant conguration employing the Duocast technology (each wireless eld
device communicates with two YFGW510s).
The wireless backbone network consists of the YFGW410 eld wireless management station, the
YFGW510 eld wireless access point and the YFGW610 eld wireless media converter. Any of
the following connection methods can be selected.
1. Metal network cable (100BASE-TX)
2. Optical ber network cable (100BASE-FX)
YFGW610 must be installed between YFGW510 and YFGW410 for optical ber network
connection to convert it to metal network connection.
3. Wireless LAN connection
Recommended access points for wireless LAN must be installed between YFGW510 and
YFGW410 for wireless LAN connection to convert it to metal network connection.
For recommended wireless LAN access points, see the User’s Manual of YFGW410 eld
wireless management station (IM 01W02D01-01EN).