User manual

45
9. REMOTE CONTROL (option)
Remote Control ID
Button Name Description
○
1 CHECK ID
Remote Control ID
○
2
Rewind
○
3
Fast Forward/ Enter Selection
○
4 MENU
Enter / Exit Menu
○
5
Up direction button / CH 1 screen display
○
6
Down direction button / CH 3 screen display
○
7
Left direction button / CH 2 screen display
○
8
Right direction button/ Enter Selection/ CH 4 screen
display
○
9
Play/ Pause
○
6
○
10
Record/ Stop
Enter MENU and select item Remote Control ID to setup remote controller ID.
(1) Enter MENU find item Remote Control ID and setup a set of number for
CHECK ID (Remote control ID consists of 10 sets of the numbers: ALL, 11, 12,
13, 21, 22, 23, 31, 32, 33).
(2) After Remote Control ID setup, you must return to LIVE monitoring mode.
Because the setup is only effective if you return to LIVE mode after the setup.
(3) After returning to LIVE monitoring mode, press remote control CHECK ID
(ALL, 11, 12, 21, 22, 23, 31, 32, 33) to confirm synchronization. When the
message “REMOTE CONTROL IS SET” appears, indicate synchronize
function setup is complete. Now you are able to control the DVR using remote
control.
(4) Each time, synchronization allows only one single device to be controlled by a
single remote control.
○
1
○
2
○
3
○
4
○
5
○
6
○
7
○
8
○
9
○
10