User manual

41
8.7 Exit
1. Press《▲》and《▼》button to move up and down the menu item.
2. Press《 》button to confirm.
3. [Exit] is situated on the second menu layer. Under this selection user may
setup the following function: Exit & Save Changes, Exit & Discard Changes
and Load Setup Default.
Item Description
[ Exit & Save Changes] Save new parameter and return to LIVE mode.
[ Exit & Discard Changes] No change and return to LIVE mode.
[ Load Setup Default ] Load default setting.
■■
NOTE : Factory Default Setup – Enter MENU and select item “EXIT”, proceed “Load Setup
Default” to return to factory default (Default Password: 111111). System returns to factory
default (111111) after returned to LIVE display.