User manual

34
8.6.5 Network Settings
1. Press《▲》and《▼》button to move up and down the menu item.
2. Press《 》or《X》button to make changes or to enter a next menu layer.
3. Press《MENU 》button to exit “Network Settings” selection.
4. [Network Settings] is situated on the third menu layer. Under this selection user
may setup the following function: Enable, Local IP, Mac Address, Password,
DDNS Setting and Video Quality.
Item Description
[ Enable ] Choose (Yes) to allow Client’s connection or (No) not to allow it.
[ Local IP ] Choose either STATIC or DHCP mode.
[ Port ] Set up the port number of network DVR.
[ Mac Address ] Set up MAC Address of the DVR system.
[ Password ] Set the password for Client’s access to connect to the DVR system.
[ DDNS Setting ] Chose (Yes) to use DDNS or choose (No) to block it.
[ Video Quality ] Network connection, PC-site display quality - higher the picture
quality greater the network bandwidth.
■■■