User manual

29
8.6.2.1 Password Change
Fig 1
1. Press《▲》, 《▼》, 《 》or《X》button to move to the desired password number.
2. Press《 》button and enter password（must be 6 digits）.
3. After entering 6 digits password, use《▲》/《▼》/《 》/《X》button to move the
cursor to “Enter”.
4. Press《 》button to confirm password.
5. Press《MENU 》button to exit “Password Change” selection.
Password change requires entering a total of three groups of password. That is
“Current Password”, “New Password” and “Confirm Password”. When password
entered is incorrect or the password format does not match (Less than 6 digits, Fig 2 is
shown), system returns to password change selection menu. When “Current Password”
entered is correct, but “New Password” and “Confirm Password” entered does not
match (Fig 3 is shown), system returns to password change selection menu. When
password change is successful (Fig 4 is shown), system returns to password change
selection menu.
Default Password : 111111
■■■■