User manual

18
8.4 Motion Detection Setup
1. Press《▲》and《▼》button to move up and down the menu item.
2. Press《 》or《X》button to make changes or to enter a next menu layer.
3. Press《MENU 》button to exit “Motion Detection” menu.
4. [Motion Detection Setup] is situated on the second menu layer. Under this
selection user may setup the following function: Channel, Sensitivity and
Motion Area.
Item Description
[ Channel ] Select the channel (1,2,3,4) for recording mode by internal motion
sensor.
[ Sensitivity ] It adjusts the sensitivity of the built-in motion sensor on the DVR
system while recording. The lower the number, the higher the sensitivity rate
(maximum sensitivity level is 4).
[ Motion Area ] Use this option to select the range of motion detection area. Use the
keypad button, remote control button to assign the area.
■■