User manual

55
11. HDD Player Software Description
PC Player Software
System Requirement
※ OS (Operating System) Windows XP or later.
※ Use your PC to install DirectX (version DirectX 7.0 or above).
※ Using remote control software, please setup the resolution to 1024x768 or above.
Hardware Requirement
※CPU 1.0 GHz or higher.
※RAM 512 Mbyte or higher.
1. Installation
A. Hardware Installation
Make sure that HDD is connected through IDE or USB interface to the PC.
B. Software Installation
1. During installation, you will need a desktop or laptop computer that meets these
minimum requirements: Windows XP.
2. Copy the PC Player Software to your PC (under any directory, e.g.: C:\ ). When
user start-up PC Player Software, it will auto create a directory “_config”, the
purpose is to store all parameter setup supplied by the PC Player Software.
2. Operation
Move the cursor to PC Player Software and double left mouse click to proceed.
When proceeding PC Player Software, it auto-detects the HDD (about 1 min. to auto
detect, and may differ depending on file size).
※
Network DVR does not support player software other then PC Player software.