User manual

8.8 Hard Drive Setup

1. Cursor (

) position indicates the current function selected.

2. Press《▲》and《▼》button to select the desired item.

3. Press《►》button to proceed.

4. Press《MENU》button to exit “HARD DRIVE SETUP” selection.

5. “HDD DRIVE SETUP”is situated on the second menu layer. Under this

menu layer user may setup to “OVERWRITE” or “STOP”.

6. When item “OVERWRITE” has been selected, press《►》button to enable

overwrite when the HDD is full (2 options: OVERWRITE or STOP).

7. HDD SIZE: displays the capacity of the HDD.

8. HDD USED: displays the capacity of the HDD already used.

N/A indicates HDD not instal※ led or unable to be detected.

HDD DRIVE SETUP

■■

> DISK FULL OVERWRITE

HDD SIZE 120103MB

HDD USED 120103MB 100%

HDD FORMAT

PRESS(

▲▼

)THEN(

►

)

PRESS(MENU)TO EXIT