User manual

33
8.7.1.1 COPY
8.7.1.1 COPY8.7.1.1 COPY
8.7.1.1 COPY
（1）Capacity of the copied data.
（2）Time required to make a data copy.
（3）Request to start data copy.
（4）Message “CAPACITY IS NOT ENOUGH” indicates that the data to be
copied exceeds the USB storage capacity available.
（5）Status / percentage complete of COPY process
（6）Press《》button to copy.
（7）Press《MENU》button to exit COPY selection.
■■■■
(1) COPY ： 10MB
(2) ESTIMATE TIME ： 2 Minute
(3) START COPY
(4) CAPACITY IS NOT ENOUGH
(5) 10% COPIED
(6) () COPY
(7) PRESS(MENU)TO EXIT