User manual

8.7 USB SETUP

1. Cursor (

) position indicates the current function selected.

2. Press《▲》and《▼》button to select the desired event to playback.

3. Press《►》button to proceed.

4. Press《MENU》button to exit “USB SETUP” selection.

5. “USB SETUP” is situated on the second menu layer. This selection enables

user to setup COPY or FORMAT/ERASE functions etc.

6. TOTAL CAPACITY: Total USB storage capacity.

7. REMAINING CAPACITY: Remaining USB storage capacity.

8. When remaining capacity equals zero, indicates that there are no more

space left for storage. Therefore, please precede FORMAT/ ERASE

function.

※ When message “NO USB DEVICE” appears indicates that the USB has not

been identified.

※ When message “USB STORAGE NOT SUPPORT” appears indicates that

the USB is not supported by the DVR.

※ When applying COPY function for the first time, please proceed

FORMAT/ERASE function and initialize the USB storage device.

※ Please do not use your PC to format the USB storage device as data loss

may occur.

USB SETUP

■■

> COPY

FORMAT/ERASE

TOTAL CAPACITY 512MB

REMAINING CAPACITY 100MB

PRESS (

▲▼

) THEN(

►

)

PRESS (MENU) TO EXIT