User manual

8.5 Buzzer Setup

1. Cursor (>) position indicates the current selected position.

2. Press《▲》and《▼》button to move the cursor to the desired item (time).

3. Press《►》button to proceed.

4. Press《MENU》button to exit “BUZZER SETUP” selection.

5. “BUZZER SETUP”is situated on the second menu layer. Under this menu

layer user may setup “MOTION ALERT”, “ VIDEO LOSS ALERT”,

“HDD FULL ALERT”, and “BUZZER TIME”.

6. MOTION ALERT: Press《►》button to setup “ON” or “OFF”, whether to

trigger the alarm when motion or sensor event has been detected (this setup

is only active when the system is under record status and schedule record is

setup to “M” (Mix) or “A” (Motion)).

7. VIDEO LOSS ALERT: Press《►》button to setup “ON” or “OFF”, whether to

trigger the alarm when video loss has been detected (this setup is only active

when the system is under record or live status).

BUZZER SETUP

■■

MOTION ALERT ON

VIDEO LOSS ALERT ON

HDD FULL ALERT ON

BUZZER TIME 05

PRESS (

▲▼

), THEN (

►

)

PRESS (MENU) TO EXIT