User manual
24
9. MOTION RECORD FRAMERATE: Press《►》button to setup different
recording speeds per channel, suitable when the recording speed under
schedule record mode is setup to “M” (mix) or “A” (motion).
NTSC:30,15,10,7,5,4,3,2,1fps.
PAL :25,12,8,6,4,3,2,1fps.
10. MOTION REC TIME: Press《►》button to setup sensor recording time after
a sensor device has been triggered (this setup functions is only active when
the recording speed under schedule record mode is setup to “A”(Motion)).
8.4.1 RECORD MODE
1. Cursor (V) position indicates the current function selected.
2. Use《▲》and《▼》button to move the cursor to the desired item (time).
3. Use《►》button to make changes.
4. Use《MENU》button to exit “SECHDULE RECORD MODE” selection.
■■■
RECORD MODE
T: TIME A: MOTION
M: TIME+MOTION
V
< M A T T T T T T T T T T T T T T T T T T T T-
--
-T >
0 3 6 9 12 15 18 21 24
PRESS (
▲▼
), THEN (
►
)
PRESS (MENU) TO EXIT