User manual

21
7. When proceeding “CH1 TITLE”, press《►》button to show the display
below:
V
CH1 TITLE CAMERA1
12345678
“V” indicates the position of the cursor. Press《▲》or《▼》button to move the
cursor, and press《►》button to change the title (maximum 8 characters).
8. All channel titles are setup in the same way.
Once the user formats the hard disk drive, the camera title returns to its default
setting (CAMERA1/ CAMERA2/ CAMERA3/ CAMERA4). It is because this
setup is stored in the hard disk drive.
8.3.1 Camera Setup
CAMERA SETTING ■■■
> CAMERA SELECT CH1
RECORD ENABLE ON
MOTION DETECTION ON
MOTION SENSITIVITY 03
HUE 08
CONTRAST 08
BRIGHTNESS 08
PRESS ( ▲▼ ), THEN ( ► )
PRESS (MENU) TO EXIT