User manual

8.3 Camera Setup

1. Cursor (>) position indicates the current function selected.

2. Press《▲》and《▼》button to move the cursor.

3. Press《►》button to proceed.

4. Press《MENU》button to exit.

5. “Camera Setup” is situated on the second menu layer. Under this menu

layer user may setup camera title (camera title for CH1, CH2, CH3 and

CH4), standard camera setup, etc.

6. Press《▲》or《▼》button to move up and down and《►》button to change

the camera view combination (select to view the desired channel).

(It consists of 16 different optional camera view combinations)

1) Select (- - - -), all cameras are disabled (no image display).

2) Select (1 2 3 4), all cameras are operational (quad image display).

3) Select (- - - 4), only camera four is operational (CH4 image display only).

CAMERA SETUP

■■

> CAMERA ENABLE 1234

CAMERA TITLE ----

CAMERA SETTING

CH1 TITLE CAMERA1

CH2 TITLE CAMERA2

CH3 TITLE CAMERA3

CH4 TITLE CAMERA4

PRESS (

▲▼

), THEN (

►

)

PRESS (MENU) TO EXIT