User manual

8.2.4 R/C CHECK ID

6. Cursor (>) position indicates the current function selected.

7. Press《▲》and《▼》button to move the cursor.

8. Press《►》button to proceed.

9. Press《MENU》button to exit “System Setup”.

※ Remote control ID consists of 10 sets of the numbers: ALL, 11, 12, 13, 21, 22, 23,

31, 32, 33.

Select “ALL” (setup is only effective if you return to LIVE mode after the setup)

and user may control any DVR using the remote control.

Select one of the numbers (e.g. 11) and setup as remote control ID, then press the

setup remote control ID number (11) on the remote control and when the message

“REMOTE CONTROL SET” (Fig. 1) appears indicates that setup is successful.

When incorrect remote control ID number has been entered, a message “R/C ID

IS NOT CORRECT” (Fig. 2) appears. Please repeat the setup until the message

“REMOTE CONTROL SET” appears.

※ After R/C CHECK ID setup, you must return to Live monitoring mode because it

is only effective if you return to LIVE mode after the setup.

SYSTEM SETUP

■■

TIME SETUP

PASSWORD SETUP

LOARD DEFAULT

LANGUAGE SETUP ENGLISH

> R/C CHECK ID ALL

VERSION V1.4

PRESS(

▲▼

), THEN (

►

)

PRESS (MENU) TO EXIT