System information

38 Logical Partitions on System i5
2. Select Link Parameter. When the window in Figure 2-5 prompts you, type the HMC host
name or IP address in the Host Name field and indicate the port number. Type 2300 into
the port number field if you are using non-SSL or 2301 if you are using SSL. Then select
OK to finish the configuration.
Figure 2-5 Configure 5250 IP address for remote console
3. When the window in Figure 2-6 prompts you, select the correct language and press Enter.
Figure 2-6 Remote 5250 console - select language