System information

Appendix A. HMC command list 505
state lshwres and lssyscfg
status lshwres
supports_hmc chhwres and lshwres
sys_ipl_attr lssyscfg
sys_ipl_major_type lssyscfg
sys_ipl_minor_type lssyscfg
time lssyscfg
total_cycles lshwres
total_proc_units lshwres
type_model lssyscfg
uncap_weight chhwres, chsyscfg, lssyscfg,
and mksyscfg
unit_id lshwres
unit_model lshwres
unit_serial_num lshwres
utilized_cycles lshwres
virtual_eth_adapters chsyscfg, lssyscfg, and
mksyscfg
List of virtual ethernet adapters. Each item in this list has
the format:
slot_num/ieee_virtual_eth/
port_vlan_id/addl_vlan_ids/
is_trunk/is_required
Note that the attribute names are not present in the
list, just their values are present.
For example:
3/1/5/"6,7,8"/0/1
specifies a virtual ethernet adapter with a virtual slot
number of 3, is IEEE compliant, has a port vlan ID of 5,
additional vlan IDs of 6, 7, and 8, it is not a trunk adapter,
and it is required.
If an attribute is optional and is not to be included, then no
value would be specified for that attribute. For example:
3/1/5//0/1
specifies a virtual ethernet adapter with no additional vlan
IDs.
virtual_opti_pool_id chhwres, chsyscfg, lshwres,
lssyscfg, and mksyscfg
ID of the virtual OptiConnect pool to which the partition is
assigned. A value of 0 indicates virtual OptiConnect is
disabled for the partition.
This attribute is only valid for
OS/400 partitions.
Attribute Used in command Description
Command attributes