System information

Appendix A. HMC command list 499
lpar_io_pool_ids chsyscfg, lshwres, and
mksyscfg
List of IDs of the I/O pools in which the partition is
participating. A valid I/O pool ID is a number between 0
and the maximum number of I/O pools supported on the
managed system (max_io_pools) - 1. A value of none,
which indicates that the partition is not participating in any
I/O pools, is also valid.
lpar_keylock lssyscfg Partition keylock position. Possible values are norm
(normal) or manual (manual).
lpar_name chsyscfg, lshwres, and
mksyscfg
Partition name.
lpar_names chsyscfg, lshwres, lssyscfg,
and mksyscfg
List of partition names.
lpar_type mksyscfg Partition type. Valid values are aixlinux and os400.
load_source_slot chsyscfg, lshwres, lssyscfg,
and mksyscfg
Complete physical location code of the slot that has the
load source I/O device. This attribute is only valid for
OS/400 partitions
mac_addr lshwres MAC address for the virtual ethernet adapter.
mac_prefix chhwres and lshwres The first 3 bytes of the MAC address to be assigned to all
virtual ethernet adapters for this managed system. This
must be specified as a 3 byte hex value.
max_interactive chsyscfg, lssyscfg, and
mksyscfg
Maximum interactive performance percentage for the
partition. The value for this attribute must be a number
between 0 and 100. This attribute is only valid for OS/400
partitions.
max_io_pools lshwres Maximum number of I/O pools supported on the managed
system.
max_lpars lssyscfg Maximum number of partitions supported on the managed
system.
max_mem chsyscfg, lssyscfg, and
mksyscfg
Maximum amount of memory that the partition will
support. The amount of memory must be specified in
megabytes, and
must be a multiple of the memory
region size
. The amount must also be greater than or
equal to the desired memory (desired_mem) for the
partition.
max_optimal_interacti
ve
lshwres Maximum optimal interactive performance percentage for
the specified processing units value. This attribute is only
valid for OS/400 partitions.
max_power_ctrl_lpars lssyscfg Maximum number of power controlling partitions.
Attribute Used in command Description
Attribute Used in command Description
max_procs chsyscfg, lssyscfg, and
mksyscfg
max_proc_units chsyscfg, lssyscfg, and
mksyscfg
Command attributes