System information

498 Logical Partitions on System i5
io_slots chsyscfg, lssyscfg, and
mksyscfg
List of I/O slots for the partition. Each item in this list has
the format:
phys_loc/ slot_io_pool_id/is_required
Note that the attribute names are not present in the list,
just their values are present.
For example, U47070041076RX5L1-P2-C3/1/2/1
specifies an I/O slot with a physical location code of
U47070041076RX5L1-P2-C3, it is assigned to I/O pool 2, and
it is a required slot.
If an attribute is optional and is not to be included, then no
value would be specified for that attribute.
For example, U47070041076RX5L1-P2-C3//1
specifies an I/O slot that is not assigned to an I/O pool.
ip_addr lssyscfg Managed system's IP address.
ipl_side chsyscfg Platform IPL side for the next IPL. Valid values are perm
(permanent) or temp (temporary).
ipl_source lssyscfg IPL source for the partition. Valid values are a, b, c, and
d.
This attribute is only valid for OS/400 partitions.
ipl_speed chsyscfg Platform IPL speed for the next IPL. Valid values are slow
or fast.
ipl_speed_override chsyscfg Platform IPL speed override for the next IPL. Valid values
are none, slow, or fast.
is_required chhwres and lshwres Indicates whether the I/O slot or virtual I/O adapter is
required for the partition. Valid values are 0 (no) and 1
(yes).
is_trunk chhwres and lshwres Indicates whether the virtual ethernet adapter is a trunk
adapter. Valid values are 0 (no) and 1 (yes).
local_slot_num lssyscfg Local virtual slot number for the SMC virtual I/O adapter.
local_hub_drc_index lssyscfg DRC index for the local hub for the SMC virtual I/O
adapter.
logical_serial lssyscfg Logical serial number of the partition.
lpar_config lssyscfg Current LPAR configuration state of the managed system.
Possible values are full (full system partition
configuration) or norm (normal lpar configuration).
Attribute Used in command Description
lpar_id chsyscfg, lshwres, lssyscfg,
and mksyscfg
Partition ID. Valid values are 1 through the maximum
number of partitions supported on the managed system
(max_lpars).
lpar_ids chsyscfg, lshwres, lssyscfg,
mksyscfg
List of partition IDs.
Command attributes