System information

Appendix A. HMC command list 497
desired_proc_units chsyscfg, lssyscfg, and
mksyscfg
Desired number of processing units for the partition. This
attribute is only valid when the processing mode is
shared.
device_attr chhwres and lshwres Indicates whether the virtual SCSI or serial device is a
client or server device. Valid values are client or server.
drc_name lshwres The DRC name of the I/O slot.
dump_type lsdump Type of hardware dump. Possible values are eventlog
(platform event entry log dump), sp (service processor
dump), sys (system hardware and hypervisor dump), pss
(power subsystem dump), and sma (SMA adapter dump).
ecs_slot chhwres, chsyscfg, lshwres,
lssyscfg, and mksyscfg
Complete physical location code of the slot that has the
ECS modem. A value of none indicates that there is no
ECS modem.
This attribute is only valid for OS/400
partitions.
full_aix_linux_boot_m
ode
lssyscfg The boot mode used for the previous/current/next full
system AIX/Linux partition activation. Possible values
are norm (normal), dd (diagnostic default boot path), sms
boot to SMS menus), of (boot to Open Firmware prompt),
and ds (diagnostic stored boot path).
full_os400_ipl_source lssyscfg The IPL source used for the previous/current/next full
system OS/400 partition activation. Possible values are
a, b, c, and d.
has_os400_vpd lshwres
hsl_capable lssyscfg Indicates whether the managed system supports HSL
OptiConnect. Possible values are 0 (no) or 1 (yes).
Attribute Used in command Description
hsl_opti_pool_id chhwres, chsyscfg, lshwres,
lssyscfg, and mksyscfg
ID of the HSL OptiConnect pool to which the partition is
assigned. A value of 0 indicates HSL OptiConnect is
disabled for the partition.
hyp_capabilities lssyscfg Hypervisor capabilities.
ieee_virtual_eth chhwres and lshwres Indicates whether the virtual ethernet adapter is
IEEE-compliant. Possible values are 0 (no) or 1 (yes).
iop_info lshwres
io_pool_id lshwres I/O pool ID.
Command attributes