System information

490 Logical Partitions on System i5
to activate
-f <profile name> - the name of the profile to use when
activating a partition
this parameter is only valid for -r lpar
--test - validate the system profile
this parameter is only valid for -r sysprof
--continue - continue on error when activating a system
profile
this parameter is only valid for -r sysprof
--help - prints this help
List hardware resources (lshwres)
This command lists the hardware resources of a managed system (Example A-4).
Example: A-4 Command usage for lshwres
Usage: lshwres -r io | mem | proc | virtualio
[--rsubtype unit | bus | slot | iopool | taggedio | eth |
hslopti | virtualopti | scsi | serial]
-m <managed system>
[--level sys | lpar | slot | sharedpool | openserial]
[--filter "<filter data>"]
[-F <attribute names>]
[--header]
[--help]
Lists the hardware resources of a managed system.
-r - the type of resources to be listed:
io - I/O
mem - memory
proc - processor
virtualio - virtual I/O
--rsubtype - the subtype of resource to be listed:
unit - I/O unit
bus - I/O bus
slot - I/O slot or virtual I/O slot
iopool - I/O pool
taggedio - tagged I/O
eth - virtual ethernet
scsi - virtual SCSI
serial - virtual serial
-m <managed system> - the managed system's name
--filter "<filter data>" - filters the data to be returned
the format is:
"filter_name1=value,filter_name2=value,..."
or
""filter_name1=value1,value2,...",..."
-F <attribute names> - comma separated list of attributes to be
output
--header - prints a header of attribute names when -F is
also specified
--help - prints this help
Valid parameter combinations are as follows:
-r io --rsubtype unit [--filter units]
-r io --rsubtype bus [--filter units,buses]
-r io --rsubtype slot [--filter units,buses,slots,pools,
lpar_ids | lpar_names]