System information

Chapter 11. OpenSSH 367
Once the scheduled activity is completed, you can check the history log (which shows the
completion of the job) as shown in Figure 11-46.
Figure 11-46 io-remove histlog
Figure 11-47 shows the iodetails after removing the i/o.
Figure 11-47 iodetails - after removing the i/o
QSH Command Entry
>
$
> iodetails
phys_loc,description,lpar_name,drc_index,bus_id
C11,PCI I/O Processor,null,2101000D,13
C12,PCI Mag Media Controller,null,2102000D,13
C13,Empty slot,null,2103000D,13
C14,Empty slot,null,2104000D,13
C15,Empty slot,null,2105000D,13
C01,Empty slot,null,2101000E,14
C02,Empty slot,null,2102000E,14
C03,Empty slot,null,2103000E,14
C04,Empty slot,null,2104000E,14
C05,I/O Processor,null,2101000F,15
===>
F3=Exit F6=Print F9=Retrieve F12=Disconnect
F13=Clear F17=Top F18=Bottom F21=CL command entry
Note: This is the end of the procedure for i/o removal.