System information

Chapter 11. OpenSSH 361
Figure 11-36 iodetails - continued 5
Figure 11-31 through Figure 11-36 have shown the output of the iodetails script. In this
output, IOP and IOA at location C11 and C12 at BUS ID13 are not allocated to any partition
(that is, lpar_name is null).
򐂰 To add this IOP and IOA to the partition, run the script io-add as shown in Example 11-6.
This will add the IOP and IOA (C11 and C12)to the
SixteenProcs partition.
You can run this script io-add from the QSHELL environment interactively or you can
schedule to run the script from the i5/OS. The following procedure shows how to schedule
this script from i5/OS.
Example 11-6 io-add-script
PATH=$PATH:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:.:/usr/bin
#######################
ssh -T 9.5.17.228 chhwres -r io -m FelixComplex -o a --id 1 -l 2101000D&
#######################
ssh -T 9.5.17.228 chhwres -r io -m FelixComplex -o a --id 1 -l 2102000D
QSH Command Entry
C07,SCSI bus controller,SixteenProcs,2103000C,12
C08,Empty slot,SixteenProcs,2104000C,12
C09,Empty slot,SixteenProcs,2105000C,12
$
===>
F3=Exit F6=Print F9=Retrieve F12=Disconnect
F13=Clear F17=Top F18=Bottom F21=CL command entry