System information

Chapter 10. Using the Advanced Systems Management Interface 297
Serial port setup
You can configure the serial ports used with the call-home and call-in features with this
option. You can also set the baud rate for the serial ports.
This function is not available if your system is managed by an HMC. If your system is
managed by an HMC, you will see a panel as shown in Figure 10-19.
Figure 10-19 Serial port setup not available
Modem configuration
You can configure the modem connected to the serial ports used for the server processor
related to the call-home and call-in features with this option.
This function is not available if your system is managed by an HMC. If your system is
managed by an HMC, you will see a panel as shown in Figure 10-20.
Figure 10-20 Modem configuration not available
Call-Home/Call-In Setup
You can select which serial port and modem is used, set various telephone numbers, and add
customer and contact formation related to the call-home and call-in features with this option.
This function is
not available if your system is managed by an HMC. If your system is
managed by an HMC, you will see a panel as shown in Figure 10-21.
Figure 10-21 Call-Home setup not available