System information

Chapter 10. Using the Advanced Systems Management Interface 291
Figure 10-8 Immediate power off
System reboot
You can reboot the system quickly using the reboot function shown in Figure 10-9. The
operating system is not notified before the system is rebooted.
Figure 10-9 System reboot
Wake on LAN
You can power on your system remotely through a local area network (LAN) connection as
shown in Figure 10-10. You can choose to Enable or Disable the Wake on LAN® function.
Figure 10-10 Wake on LAN
Attention: Rebooting the system will immediately shut down all partitions. To avoid
experiencing data loss and a longer IPL the next time the system or logical partitions are
booted, shut down the operating system prior to performing a reboot.
Note: Wake on LAN is supported on ethernet port 0. It is not supported on ethernet port 1.