System information

278 Logical Partitions on System i5
b. Click the right mouse key on the blank screen. The box in Figure 9-35 is displayed.
Figure 9-35 HMC window
c. Select Terminals and then rshterm. A term session is started (Figure 9-37).
Figure 9-36 HMC window
d. From the xterminal session (Figure 9-37) you can enter the commands to start the
migration process.
Figure 9-37 xTerminal session window
e. Load your diskette or CD that contains your configuration data into your drive.
f. Now enter the following command: migrcfg -t 1 -m [system-name] -f [filename]
(see Figure 9-38).