System information

Chapter 9. Migration of existing LPAR profiles to HMC 261
c. Complete the Partition Specifications window (each option described below) and
click Finish (Figure 9-5).
i. Primary Partition Console Type: Select the console type that will be used by the
Primary Partition (i.e. 9793 for Operations Console or 4746 for twinaxial, etc.)
ii. Shared Processor Pool: Enter amount of processor that will be shared among
partitions.
iii. Shared checkbox: Check this box if the partition will be using shared processors
iv. # Processors: Indicate number of processors required by the partition. If Shared,
the number can be decimal value. A minimum of 0.25 processor is recommended
for the Primary partition. Secondary partitions must have at least 0.1 processors.
v. Batch CPW: It will be determined automatically based on the number of
processors.
vi. Memory (MB): Enter amount of memory required by the partition in Mega Bytes.
vii. Int% or Int CPW: Enter the percentage of the processor CPW or amount of CPW
that will be used for Interactive work.
Figure 9-5 Example window Partition Specifications