System information

Chapter 6. Working with the HMC 225
Table 6-7 (D1xx) Service processor status progress codes(Platform power off)
6.9.6 Service processor reset
If the system hangs after the code that sent you to this procedure appears in the control panel
or Operator Panel Value in HMC, perform these steps to reset the service processor. If the
platform is already powered off, you can reset SP with ASMI.
Reset SP with ASMI
Follow this procedure:
1. Access the ASMI and log in
2. Select System Server Aids, then select either Reset Service Processor
Progress
Code
Description/Action Perform all actions before exchanging Failing Items
D1xx900C Breakpoint set in CPU controls has been hit
D1xxB0FF Request to initiate power-off program has been sent
D1xxC000 Indicates a message is ready to send to the server firmware to power off
D1xxC001 Waiting for the server firmware to acknowledge the delayed power off notification
D1xxC002 Waiting for the server firmware to send the power off message
D1xxC003 Server firmware handshaking is complete
Attention: Resetting SP will lost customized configuration on SP! You need to
synchronize from the HMC after resetting. Before resetting SP, please make sure that you
keep a backup of the configuration data.