System information

Chapter 4. HMC Guided Setup 137
If you have configured any network settings during the Guided Setup Wizard, then you will
probably receive a message asking you whether you wish to reboot the HMC (see
Figure 4-46).
Figure 4-46 Guided Setup wizard - Reboot message
In our example, we click Yes to reboot the HMC and activate our new network settings.
This completes the HMC Guided Setup Wizard.
Post Guided Setup tasks
If you were not able to set up all the information through the wizard, you can go back and use
the standard HMC menu to complete tasks. If you are direct connected to the HMC, some
tasks could be missed at first.
For example, you may not have all the user profiles set up, or you may not have both the LAN
adapters set up.