System information

Chapter 4. HMC Guided Setup 125
Figure 4-26 Guided Setup - eth1 firewall by IP address
In our example we enter the remote IP address 9.5.6.124 and mask 255.255.255.0 and
click Add and then click OK. When we return to the HMC firewall configuration panel, we
click Next to continue with the Guided Setup wizard.
26.The Guided Setup Wizard - Configure Network Settings panel is shown (Figure 4-27). If
you have more network adapters available you can configure them now by selecting the
relevant adapter and selecting the Yes radio button.
Figure 4-27 Guided Setup - Final network configuration panel
As both our network adapters have now been configured, we select the No radio button
and click Next to continue.
Note: It may take a few minutes before the next panel appears.